Skip to main content
Menards

Step 8 · Turn Water On and Check for Leaks

First, make sure the new outdoor spigot is in the closed position. Also, close any other faucets you opened to drain the system. Go to the main water shut-off valve and turn it on slowly, turning it counter-clockwise. Listen for the sound of pipes filling with water. Go immediately to the interior connection point and carefully inspect the new solder joint for any drips or leaks. Use a dry paper towel to wipe the joint, which will make even the smallest bead of water visible. Then, go outside and check the spigot itself. Slowly open the handle and let water flow for a minute to flush out any debris. Check again for leaks both inside and out while the water is running and after you shut it off.